Post Offer Free
Wuhan Changguang Battery Co., Ltd  

Gold Index: 3187

You are here: home  > 12V 4AH Alarm System Batteries For Fire Safety Emergency System

12V 4AH Alarm System Batteries For Fire Safety Emergency System 

Place of Origin: Zhejiang, China (Mainland) 
inquire
Add to My Favorites
HiSupplier Escrow
Share |

Product Detail

Model No.: SE1240

12V 4AH Alarm System Batteries For Fire Safety Emergency System
 
 
Specifications:</s

12V 4AH Alarm System Batteries For Fire Safety Emergency System

 

 

Specifications:

Nominal Voltage 12V
Nominal Capacity (C20) 4Ah (10.5V,at 25)
Dimension Length 90mm
Width 70mm
Height 101mm
Total Height 107mm
Weight Approx. 1.47 kg
Terminal FO-02/FO-03
Internal Resistance Approx. 38 mΩ (25)
Max Charging Current 1.2A

 

 

 

CHARGE

Using Mode Charging Voltage Temperature Compensation Max Charging Current
Standby Use 2.275±0.025V/cell (25) -3.3mV//cell 1.2A
Cyclic Use 2.45±0.05V/cell (25) -5mV//cell

 

 

Description:

Designed life for floating charge is 2~3 years (20);

Gas Recombination;

Wide temperature scope of application (-15~45);

Best temperature of application (20±5);

No leaking, safe and reliable;

Standing or lying down for using, convenient to transport and install;

High sealed reaction efficiency, little loss of water, no need to add distilled water or electrolyte, simple to use and maintain;

Application specific design.

 

Applications:

Alarm & Security system

Emergency Power Systerm

Fire-safety Emergency System,

Banks & Financial Centre

Hospital& Testing Laboratories

Telecommunication

 

 

 

TECHNICAL FEATURES:

• Sealed Construction

The unique construction and sealing techniques of the battery guarantee leak proof operation in any position with no adverse effect to capacity or service life.

 

• Electrolyte Suspension System

All batteries utilize an electrolyte suspension system consisting of a high porosity, glass fiber material which in conjunction with plates, totally absorb and contain the electrolyte.

 

• Gas Recombination

CGB batteries incorporate a built-in design that controls gas generation and induces recombination of more than 99% of gases generated during float or cyclic usage.

 

• Maintenance Free Operation

Due to the perfectly sealed construction and the recombination of gasses within the cells, the battery is almost maintenance free.

 

• Low Pressure Valve Regulated System..

All batteries are equipped with safety release valves, designed to operate between 1.5 and 6 psi (10-40kPa) and automatically reseal. Hence, there is never an excessive accumulation of gas within the battery.

 

• Heavy Duty Grids

Heavy duty lead calcium tin alloy grids provide an extra margin of performance and service life in either float or cyclic applications.

 

• Cyclic Service Life

More than 600 discharge/recharge cycles can be realized from CGB CB and HR batteries, dependent on the average depth of discharge.

 

• Float Service Life

SE and CB, HR Series batteries have an expected life span of 3 to 5 years in float service applications.

 

• Self Discharge - Shelf Life

The self discharge rate at room temperature is approximately 3% of rated capacity per month.

 

• Operating Temperature

CGB Batteries may be operated over a broad range of ambient temperatures.

 

• Deep Discharge Recovery

The batteries recover their capacities even after repeated deep discharges.

 

 

STORAGE

Batteries should be stored in dry and clean warehouse which has good air exchange system. Batteries should avoid direct sunlight. Batteries should not be near to heat (such as radiator, the distance should more than 1m). Batteries should avoid any toxic gas and organic solvent.

When the ambient temperature is less than 25, the longest storage life is 6 months. If ambient temperature is higher, the longest storage life varies as specified in below chart.

Storage Temperature () ≤25 2633 3440
Storage Time (Month) 6 3 1
 

                                                                                                                                                        

Batteries should be recharged within the storage life or before using.Charging methods: maximum charging current 1.2A, constant voltage 2.45±0.05V/cell (25);

Charging time: 15~20h; Temperature compensation coefficient: -5mV//cell.

 

Warning

• Replacement of battery shall be performed as per following order. If failed, it may cause fire and explosion. Remove cable from negative terminal first.Connect cable to negative terminal last.

• When connect cable to battery, make sure not to get changed post of +and -. It may cause the damage of electronic components or fire.

• When ueing the battery ,handle with care,sulfuric acid may cause blindness or severe burn.

bigPhoto
 Mr. Mr. Gao song

Tel: 86-27-84891323
Contact to this supplier

Related Search

Find more related products in following catalogs on Hisupplier.com

Company Info

Wuhan Changguang Battery Co., Ltd [China (Mainland)]


Business Type:Manufacturer
City: Wuhan
Province/State: Hubei
Country/Region: China (Mainland)

You May Like:

Product (65)